Parts Needed
-- PSP
-- 2x 603 SMD Led
-- 30 Gauge Kynar Wire [Two Colors is Best] but one is still good

Tools Needed
-- 15-30 watt Soldering Iron
-- Solder
-- Screwdriver
-- Flux
-- Electical Tape



Average Time To Complete- About 45-60 Minutes

Difficulty Rating-3/5

Step By Step Tutorial



Until you are at your mobo.



Ok so Now you need to unplug your speaker.



I use the right one more ofter but either one works.



Ok so now heat up your iron get all you leds out. While waiting
for your iron to heat up you will need to get 4 pieces of wire.
Two will go to the Right Trigger and Two to the Left Trigger.

Like So.

Ok so after you wire your leds to the wire you have to wire it to
the back of the speaker. The black wire leads to ground or
negative and the gray leads to positive.




So then when that's wired the back of your speaker should look


you can drill the triggers or put them next to the L&R triggs .....drilling is optional but helps in keeping leds still

Now you drill the triggers. You should use a 1/16 or 1/8 bit. I
didn't have a drill near bye so I used a dremel but either are
fine. So you drill a hole in the middle of the trigger not to far
though just enough for a bit of hot glue and an led.





Now just put a dab of hot glue on the led and stick into the hole-



Now just route your wires. It doesn't really matter but here is an example-



And I found it better if you put some tape over the wires to keep them in place.

Now We just need to put it back together
Put on your LCD Cage and screw it in. Now every time you put
something on after modding ALWAYS TEST IF THE PSP WORKS! It would
really suck if it all together and you notice it doesn't work
right?




Put In your LCD


Put on your home bar-



Put on your faceplate-
Now after your put in every screw test that the PSP turns on and
the leds too if they don't its a short.



Turn it over and screw in these screws-

Nice one but you can make it more simple .

Nice Guide. Next time try to put picture it'll help alot for people who are new with modding ;P

yea im still going to update this post
pic are being added

does it matter if they hav the name of an other site because i dnt feel like editin pics
w4ste of time but if i need to i will

hum don't post it if another site is on it...

but if this guide is copy and paste could you put the credit..

anyways if you can do this mod, just make your own picture.

yea it has the name of Kenshinffx and jumbo but its mainly Kenshinffx who made it....anyways ill just edit the pics without the name of the site ill also upload a vid of my psp to show how it looks like after the mod